The Security sensor is a magnetic on/off switch for monitoring doors and windows. When the door, or window, opens the input signal is detected by the sensorProbe or securityProbe base unit. Alerts can then be generate to notify you even including images captured from an attached camera to give you instant visual feedback on the situation.
They are active switches that close when one half of the sensor is in close proximity to its mate. When the two sensor pairs are moved apart from each other they open. The base unit senses closure and opening of these switches.
Specifications
Specifications
Measurement Range
Alarm or Normal
Sensor Type
Open / Closed magnetic switch
Input Measurement Rate
Multiple readings every second
Normal input state is settable under software
Features
Unlimited number can be wired in series using one Port
No reasonable limitation on distance from base unit
Interface
Communications Cable
RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length
1000Ft (305m) with approved low capacitance shielded cable or UTP
Power Source
Powered by the sensorProbe2 or sensorProbe2+. No additional power needed
Full autosense including disconnect alarm
Power Consumption
Typical 8.95 mWatt, 1.79mA
Sensor count
1
Features
Unlimited number can be wired in series using one
Intelligent sensor port
SNMP OID for monitoring across a network
No reasonable limitation on distance from base sensorProbe or securityProbe unit
Powered by base unit, no additional power source required
