Remote Monitoring with the AKCP Temperature Sensor. Ideal for Data Center monitoring, or anytime a temperature sensor is needed. Network enabled SNMP temperature sensor.
Designed to record accurate temperature sensor data it is ideal for giving advanced warning of temperature fluctuations that can potentially damage sensitive equipment
Easier to install Temperature sensors ship with cables and temperature sensor clips for easy installation in server cabinets.
Reduced complexity AKCP can provide custom length cables suitable for any installation. Ask our sales team about custom sensor cables today!
Overview
The AKCP temperature sensor is compatible with all of our sensorProbe and securityProbe series base units. Designed to record accurate temperature data it is ideal for giving advanced warning of temperature fluctuations that can potentially damage sensitive equipment. This advance notification can protect your data and systems from catastrophic events.
Semiconductor, microprocessor controlled type temperature sensor
Can be extended up to 1,000ft with standard CAT5 cable
Own SNMP OID for data collection over a network
0.5ºC resolution
Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you. All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature trends over time.
For those who require an industrial strength temperature sensor for extremes of high or low temperatures, we recommend the AKCP Thermocouple sensor.
Specifications
Specifications
Temperature
Measurement Range
-55°C to +75°C
-67°F to +167°F
Measurement Resolution
securityProbe and sensorProbe+ series
0.1°C increments
0.2°F increments
sensorProbe series
1ºC increments
1ºF increments
Measurement Accuracy
sensorProbe+ series and securityProbe series
±0.2°C accuracy from -10°C to +75°C
±0.5°F accuracy from +14°F to +167°F
sensorProbe series
±1°C accuracy from -10°C to +75°C
±1°F accuracy from +14°F to +167°F
Calibration
NIST traceable Calibration Certificate (TMPxx-NIST2 / 4)
Built in calibration check, alerts when sensor needs re-calibration
NIST4 with calibration check and failover
Interface
Communications cable
RJ-45 jack to sensor using UTP CAT5e/6 cable
Power source
Powered by the base units. No additional power needed
Power Consumption
Typical 7.25mWatt, 1.45mA
Maximum Cable Length
Run length is 1000 feet (300 meters) with low capacitance shielded cable or UTP
Sensor type
Semiconductor, microprocessor controlled
Dimensions
56 x 55 x 33.3 mm
Mounting
DIN rail mounting
Screw mounting
Sensor count (TMPxx)
1
Sensor count (TMPxx-NIST2 / 4)
3
Important Note
The fixed one foot type or TMP01 are not designed to be extended. If you need to extend these sensors then you need to use the TMP00 (remote type). We also do not recommend you trying to connect any of our AKCP sensors including the temperature and dual temp humidity sensors though patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.
Compatability
TMPxx-NIST2 and NIST4 compatible with sensorProbe+ series only
Sensor Types
Sensor is available in 2 variations:
Fixed length with 1ft of cable attached
Variable length. Ships with free 5ft CAT5 cable, user can extend up to 1,000ft.
