SensorProbe1+ Basic PoE

SensorProbe1+ Basic PoE


SensorProbe1+ Basic PoE (No PSU Included) 1 Port Active Monitoring Device With PoE, With 5ft Fixed Length TMP And USB Cable (No PSU Included)

Add to Quote
SKU: SP1+B-PoE Categories: , ,


Monitor environmental, power, and security for a single rack

The sensorProbe1+ (SP1+) is a compact device. Equipped with a dry contact I/O, an intelligent sensor port, and a built-in temperature sensor on 5ft cable. It runs the same user interface as the rest of the sensorProbe+ product line, with all the same features such as IPV6, SNMPV3, Radius, TACACS, Modbus TCP/IP, and up to 80 virtual sensors.

Connect the sensor splitter box with cabinet thermal maps and contactless current meter, and you have a complete monitoring solution for your rack. Monitor temperature front and rear, top middle, and bottom. Check your ∆T, humidity, and current consumption. Utilize the dry contact for door contacts, and virtual sensors to monitor third party devices installed in the rack.

With PoE built in as standard, the additional 5VDC USB power input can be used as the primary source of power with PoE as backup power.



Dimension Size 82 x 72 x 35 mm
Weight 0.2 Kg
Network Interface Standard 10/100 Mbps Full Duplex
Ethernet RJ-45 Port
Mounting Screw mounting
Built-in DIN Rail Clip and cable tie loops
Power Requirements PoE IEEE 802.3af support
Optional external 5.5V 3A Power Adapter Input Voltage and Current ratings : 100V~240V – 0.22A
Optional external 12-24 or 40-60 VDV dual inputs
Status Indication LED indication for Power
LED for network connectivity
LED for sensor online and threshold status
LED for dry contact input status
RJ-45 1 RJ-45 Sensor Ports for connecting AKCP Autosense Sensors
Components Manufactured using highly integrated, low-power surface mount technology to ensure long-term reliability.
Operating Environment Temperature: Min. -35° C – Max. 80° C
Humidity: Min. 20% – Max. 80% (Non-Condensing)
MTBF 1,400,000 Hours based on field experience with sensorProbe units.
Inputs 1x RJ45 Sensor Port
1x Dry Contact I/O (0/5VDC)
1x 10/100 Ethernet Port
1x hard-wired 5ft temperature sensor
5x free virtual sensors (additional unlocked via license)
Outputs Configurable output signals (0VDC/5VDC) on any of the 4 RJ-45 sensor ports
Max Sensors Maximum of 400 online sensors, including virtual sensors.
Maximum Number of Access Control Users 500 Users
100 Users default
Supported Protocols Rsyslog
Encrypted E-mail
5 Dry Contact: DC5 5 dry contact input sensors (per port) 1 License equal 1 RJ45 port unlocked
Virtual Private Network (VPN): VP VPN – Connect to AKCPro Server from your base unit through VPN over Ethernet or cellular network.
Virtual Sensor pack: VS Virtual sensor (pack of 5 sensors). Maximum of 80 virtual sensors. * **
Every SP2+ comes with 5 free virtual sensors
500 Access Control user database: UA 500 users for access control (SP+ series has 100 users as standard)
IPV6: SP-IPV6 Support for IPV6 network addresses
Radius: RAD Radius user authentication server connection. TACACS authentication to Radius