Monitor your battery temperature to ensure optimum performance.
Designed to easily connect to battery terminals, the BTTS connects directly to the Negative Battery Terminal and provide readings to aid in monitoring the battery health, and internal temperature. As the battery terminal provides the closest thermal connection to the batteries internal plates it will give you the closest accuracy to the actual battery temperature. The sensor chip is insulated to help protect it from interference from ambient temperature fluctuations. For a more complete monitoring solution, the BATTMON sensor combines terminal temperature monitoring with voltage and current of the battery.
securityProbe and sensorProbe+ series
0.1°C increments
0.2°F increments
sensorProbe series
1ºC increments
1ºF increments
Measurement Accuracy
sensorProbe+ series and securityProbe series
±0.5°C accuracy from -10°C to +75°C
±0.9°F accuracy from +14°F to +167°F
sensorProbe series
±1°C accuracy from -10°C to +75°C
±1°F accuracy from +14°F to +167°F
Interface
Communications cable
RJ-45 jack to sensor using UTP CAT5e/6 cable
Power source
Powered by the base units. No additional power needed
Power Consumption
Typical 7.25mWatt, 1.45mA
Maximum Cable Length
Run length is 1000 feet (300 meters) with low capacitance shielded cable or UTP
